Reliability and Performance Group
A division of the Texas A&M University Turbomachinery Laboratory
Volume 7B: Structures and Dynamics
August 30, 2018
Ertas, B., Delgado, A., 2018, “Compliant Hybrid Gas Bearing Using Modular Hermetically-Sealed Squeeze Film Dampers”, Proc. Gas Turbine Tech. Conf. Exp. ASME Turbo Expo, Lillestrøm (Oslo), Norway, June 11-15, Paper No. GT2018-76312.
Journal of Tribology, vol. 140, issue 6
July 21, 2018
Delgado, A., Ertas, 2018, “Dynamic Force Coefficients of Hydrostatic Gas Films for Recessed Flat Plates: Experimental Identification and Analytical Predictions,” ASME J. Trib., 140(6), p. 061703.
Journal of Engineering for Gas Turbines and Power, vol. 140, issue 5
October 5, 2017
Ertas, B., Delgado, A., Moore, J., 2018, “Dynamic Characterization of an Integral Squeeze Film Bearing Support Damper for a Supercritical Co2 Expander, Proceedings of ASME Turbo Expo 2017, Charlotte, NC, June.
SPE Electric Submersible Pump Symposium
April 18, 2017
Salas, K., Delgado, A., Van Dam, J., Marvel, R., and Sakamoto, S., 2013, “Rotordynamic Characterization of an Electric Submersible Pump Motor, “ Society of Petroleum Engineers (SPE), ESP Workshop, Houston, TX
Volume 7A: Structures and Dynamics
August 12, 2015
Childs, D., Delgado, A., and Vannini G., 2011, “Tilting-Pad Bearings: Measured Frequency Characteristics of Their Rotordynamic Coefficients,” Proceedings of the 40th Turbomachinery Symposium, Houston, TX, Sep.
Volume 7B: Structures and Dynamics
September 18, 2014
Delgado, A., 2015, Experimental Identification of Dynamic Force Coefficients for a 110 mm Compliantly Damped Hybrid Gas Bearing,” Proceedings of ASME Turbo Expo 2014, Dusseldorf, June.
Volume 6: Oil and Gas Applications; Concentrating Solar Power Plants; Steam Turbines; Wind Energy
December 10, 2013
Delgado, A. , Catanzaro, M., Mitaritonna, N., and Gerbet, M., 2011, “Identification of Force Coefficients in a 5-pad Tilting Pad Bearing with an Integral Squeeze Film Damper,” 10th EDF/Pprime Workshop “Condition Monitoring, Performance Improvement and Safe Operation of Bearings,” Poitiers, France, Sep.
Volume 7: Structures and Dynamics, Parts A and B
December 10, 2013
Delgado, A., Vannini, G., Ertas, B., Drexel. M., and Naldi, L., 2010, “A Component Level Test Rig for Dynamic Characterization of Oil Lubricated Bearings Using Different Input Excitations,” Proceedings of The 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Hawaii, May.
Volume 6: Structures and Dynamics, Parts A and B
May 8, 2012
San Andrés, L., Delgado A., 2011 “A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically,” Proceedings of ASME Turbo Expo 2011, Vancouver, June. (Best Paper Award Structures and Dynamics Committee
Volume 6: Structures and Dynamics, Parts A and B
May 8, 2012
Ertas, B., Delgado, A., and Vannini, G., 2011, “Rotordynamic Force Coefficients for Three Types of Annular Gas Seals with Inlet Preswirl and High Differential Pressure Ratio,” Proceedings of ASME Turbo Expo 2011, Vancouver, June.