Reliability and Performance Group
A division of the Texas A&M University Turbomachinery Laboratory
SPE Artificial Lift Conference and Exhibition - Americas
October 9, 2018
Patil, A., Morrison, G., Delgado, A., 2018, “Further Evaluation of Modified Affinity Laws for the Prediction of Viscosity Effect on Pump Head Performance,” Proc. Turbomachinery Pump Symposia, Houston, Sept. 18-20.
Journal of Engineering for Gas Turbines and Power, vol. 141, issue 2
August 30, 2018
Delgado, A., Ertas, B., 2018, “Dynamic Characterization of a Novel Externally Pressurized Compliantly Damped Gas-Lubricated Bearing with Hermetically Sealed Squeeze Film Damper Modules,” Proc. Gas Turbine Tech. Conf. Exp. ASME Turbo Expo, Lillestrøm (Oslo), Norway, June 11-15, Paper No. GT2018-77212
Volume 7B: Structures and Dynamics
August 30, 2018
Ertas, B., Delgado, A., 2018, “Compliant Hybrid Gas Bearing Using Modular Hermetically-Sealed Squeeze Film Dampers”, Proc. Gas Turbine Tech. Conf. Exp. ASME Turbo Expo, Lillestrøm (Oslo), Norway, June 11-15, Paper No. GT2018-76312.
Volume 7B: Structures and Dynamics
August 30, 2018
Ertas, B., Delgado, A., 2018, “Hermetically Sealed Squeeze Film damper for Operation in Oil-Free Environments”, Proc. Gas Turbine Tech. Conf. Exp. ASME Turbo Expo, Lillestrøm (Oslo), Norway, June 11-15, Paper No. GT2018-76308
Journal of Engineering for Gas Turbines and Power, vol. 140, issue 5
October 5, 2017
Ertas, B., Delgado, A., Moore, J., 2018, “Dynamic Characterization of an Integral Squeeze Film Bearing Support Damper for a Supercritical Co2 Expander, Proceedings of ASME Turbo Expo 2017, Charlotte, NC, June.
Volume 7A: Structures and Dynamics
August 12, 2015
Childs, D., Delgado, A., and Vannini G., 2011, “Tilting-Pad Bearings: Measured Frequency Characteristics of Their Rotordynamic Coefficients,” Proceedings of the 40th Turbomachinery Symposium, Houston, TX, Sep.
Volume 7B: Structures and Dynamics
September 18, 2014
Delgado, A., 2015, Experimental Identification of Dynamic Force Coefficients for a 110 mm Compliantly Damped Hybrid Gas Bearing,” Proceedings of ASME Turbo Expo 2014, Dusseldorf, June.
Volume 6: Structures and Dynamics, Parts A and B
May 8, 2012
Ertas, B., Delgado, A., and Vannini, G., 2011, “Rotordynamic Force Coefficients for Three Types of Annular Gas Seals with Inlet Preswirl and High Differential Pressure Ratio,” Proceedings of ASME Turbo Expo 2011, Vancouver, June.
Volume 6: Structures and Dynamics, Parts A and B
May 8, 2012
San Andrés, L., Delgado A., 2011 “A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically,” Proceedings of ASME Turbo Expo 2011, Vancouver, June. (Best Paper Award Structures and Dynamics Committee
Volume 6: Structures and Dynamics, Parts A and B
January 11, 2011
Delgado, A., Vannini, G., Ertas, B., Drexel. M., and Naldi, L., 2010, “Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad Configurations,” Proceedings of ASME Turbo Expo 2010, Glasgow, June.