• Skip to primary navigation
  • Skip to main content
  • About Us
    • Principal Investigator
  • Research
    • Rotordynamics
    • Bearings
    • Seals
    • Pumps
  • Publications
    • Journal
    • Conference Proceedings
    • Patents
  • People
  • Contact Us
    • Open Positions
  • Search

Reliability and Performance Group

A division of the Texas A&M University Turbomachinery Laboratory

Texas A&M University College of Engineering

Journal

Effect of Leakage Flow Path Wear on Axial Thrust in Downhole Electrical Submersible Pump Unit

Journal of Fluids Engineering, vol. 142, issue 5

December 3, 2019

Patil, A., Kasprzyk, M., Delgado, A., and Morrison, G., 2019, “Effect of Pump Leakage Flow Path Wear On Axial Thrust in Downhole Esp Unit.” ASME. J. Fluids Eng., Accepted for publication. doi: https://doi.org/10.1115/1.4045571

Extending Classical Friction Loss Modeling to Predict the Viscous Performance of Pumping Devices

Journal of Fluids Engineering, vol. 141, issue 10

March 13, 2019

Patil, A., Yin, W., Agarwal, R., Delgado, A., and Morrison, G., 2019, “Extending Classical Friction Loss Modeling to Predict the Viscous Performance of Pumping Devices.” ASME. J. Fluids Eng., 141(10), p. 101202

Static and Dynamic Coefficient Measurements for a Thrust Collar Used in an Integrally Geared Compressor

Journal of Engineering for Gas Turbines and Power, vol. 141, issue 5

October 5, 2018

Kerr, T., Crandall, A., Childs, D., Delgado, A., 2019, “Static and Dynamics Coefficient Measurements for a Thrust Collar Used in an Integrally Geared Compressor,” ASME. J. Eng. Gas Turbines Power, 141(5), p. 051020.

Hermetically Sealed Squeeze Film Damper for Operation in Oil-Free Environments

Journal of Engineering for Gas Turbines and Power, vol. 141, issue 2

September 18, 2018

Ertas, B, Delgado, A., 2019, “Hermetically Squeeze Film Damper for Operation in Oil Free Environments,” ASME. J. Eng. Gas Turbines Power, 141(2), p. 022503.

Compliant Hybrid Gas Bearing Using Modular Hermetically Sealed Squeeze Film Dampers

Journal of Engineering for Gas Turbines and Power, vol. 141, issue 2

August 30, 2018

Ertas, B, Delgado, A., 2019, “Compliant Gas Bearing Using Modular Hermetically-Sealed Squeeze Film Dampers,” ASME. J. Eng. Gas Turbines Power, 141(2), p. 022504.

Dynamic Characterization of a Novel Externally Pressurized Compliantly Damped Gas-Lubricated Bearing With Hermetically Sealed Squeeze Film Damper Modules

Journal of Engineering for Gas Turbines and Power, vol. 141, issue 2

August 30, 2018

Delgado, A., Ertas B., 2019, “Dynamic Characterization of a Novel Externally Pressurized Compliantly Damped Gas-Lubricated Bearing with Hermetically Sealed Squeeze Film Damper Modules,” ASME J. Eng. Gas Turbines Power, 141(2), p. 021028.

Hermetically Sealed Squeeze Film Damper for Operation in Oil-Free Environments

Volume 7B: Structures and Dynamics

August 30, 2018

Ertas, B., Delgado, A., 2018, “Hermetically Sealed Squeeze Film damper for Operation in Oil-Free Environments”, Proc. Gas Turbine Tech. Conf. Exp. ASME Turbo Expo, Lillestrøm (Oslo), Norway, June 11-15, Paper No. GT2018-76308

Dynamic Force Coefficients of Hydrostatic Gas Films for Recessed Flat Plates: Experimental Identification and Numerical Predictions

Journal of Tribology, vol. 140, issue 6

July 21, 2018

Delgado, A., Ertas, 2018, “Dynamic Force Coefficients of Hydrostatic Gas Films for Recessed Flat Plates: Experimental Identification and Analytical Predictions,” ASME J. Trib., 140(6), p. 061703.

Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical Seal: Large Contact Force

Journal of Tribology, vol. 132, issue 3

July 21, 2010

Delgado, A., and San Andrés, L., 2010, “Identification of Force Coefficients in a Squeeze Film Damper with a Mechanical Seal: Large Seal Contact Force,” ASME J. Tribol., 132(3), p. 032201.

A Model for Improved Prediction of Force Coefficients in Grooved Squeeze Film Dampers and Oil Seal Rings

Journal of Tribology, vol. 132, issue 3

July 21, 2010

Delgado, A., and San Andrés, L., 2010, “A Model for Improved Prediction of Force Coefficients in Grooved Squeeze Film Dampers and Grooved Oil Seal Rings,” ASME J. Tribol., 132(3), p. 032202.

  • 1
  • Go to page 2
  • Go to Next Page »

© 2020–2026 Reliability and Performance Group Log in

Texas A&M Engineering Experiment Station Logo
  • College of Engineering
  • Facebook
  • Twitter
  • State of Texas
  • Open Records
  • Risk, Fraud & Misconduct Hotline
  • Statewide Search
  • Site Links & Policies
  • Accommodations
  • Environmental Health, Safety & Security
  • Employment